Cambridge, Dynasty and Nordic are the same size laminate, 40-7/8 in by 13-3/4 in with a 5-7/8 in exposure, and all three are made in Calgary. Cambridge reaches IKO’s 210 km/h wind limit only with six nails and hand sealing; Dynasty and Nordic reach it with standard nailing. Nordic adds polymer-modified asphalt and a UL 2218 Class 4 impact rating.
Quick facts
- Same footprint: Cambridge, Dynasty and Nordic measure 40-7/8 in x 13-3/4 in (1,038 mm x 349 mm), expose 5-7/8 in (149 mm) and cover 100 ft² with 3 bundles.
- Wind limits in Canada: Dynasty and Nordic 210 km/h; Cambridge 177 km/h, or 210 km/h with six nails; Marathon Plus AR 112 km/h, or 129 km/h with six nails.
- Impact: Nordic is rated FM 4473 / UL 2218 Class 4; the Cool Colors Plus versions of Cambridge and Dynasty are rated Class 3.
- Non-prorated period in Canada: 180 months for all three laminates, or 240 months under the ROOFPRO Iron Clad extension.
- Algae: 120 months of blue-green algae coverage on the three laminates; 60 months on Marathon Plus AR.
- Nailing target: Dynasty and Nordic carry the 1-1/4 in ArmourZone woven band; the laminate nail line sits 6-3/8 in above the exposed edge.
- Calgary plant: IKO lists Calgary, Alberta as a plant for Cambridge, Dynasty, Nordic, Hip & Ridge 12, Hip & Ridge Class 4, Leading Edge Plus and Armour Starter.
- Installed price: Cambridge re-roofs ran $450 to $590 per square, before GST, in 2024 to 2025 Calgary quotes.
- CodePlus: Dynasty and Nordic installed six-nailed to IKO’s CodePlus method carry a 25-year Iron Clad period and a 210 km/h wind limit.
Which IKO shingle lines are sold for Calgary roofs?
IKO’s Canadian warranty names three laminates that matter for a Calgary re-roof: Cambridge, Dynasty and Nordic, each with a Limited Lifetime warranty. A fourth line, the Marathon Plus AR 3-tab shingle, carries a 25-year warranty but is marked “Available in Eastern Canada”.
IKO also names Calgary as a plant for Marathon Plus AR, so the label describes where it is sold, not where it is made.
IKO lists eight manufacturing plants: Brampton, Calgary, Hawkesbury and Toronto in Canada, and Hillsboro, Kankakee, Sumas and Sylacauga in the United States.
IKO makes Nordic at three of them (Calgary, Hillsboro and Kankakee), so Calgary is the only Canadian plant listed for it. Dynasty comes from seven plants and Cambridge from all eight, with Calgary among them.
IKO also sells “Cool Colors Plus” versions of Cambridge and Dynasty, built for California’s cool-roof rules and marked “Available in select US markets”. Their colours and some warranty values differ from the Canadian product, so the comparison below shows both.
IKO’s range also includes a designer line, Armourshake, a laminated two-piece shingle with a shake look. It measures 37-3/8 in x 18-11/16 in (950 mm x 475 mm) with a 5-1/2 in (140 mm) exposure and comes 14 shingles to a bundle, so a square takes 5 bundles against 3 for the laminates.
IKO makes it in Class 3 and Class 4 versions under FM 4473 and UL 2218, and lists it to CSA A123.5, ASTM D3161 Class F and ASTM D7158 Class H. It takes five nails in standard application and six on steep slopes or in high-wind areas, and Armour Starter must be laid over an initial starter course.
How do Cambridge and Dynasty differ when they are the same size?
Cambridge and Dynasty share every dimension, so the difference comes down to the nailing band, the wind conditions and the colours. Both are fibreglass-mat laminates coated on both faces with weathering asphalt, both use IKO’s FastLock sealant strip, and both list ASTM D3161 Class F, ASTM D7158 Class H and ASTM E108/UL 790 Class A fire resistance.
Dynasty has ArmourZone, a 1-1/4 in reinforced woven band across the nailing area that IKO says helps prevent nail pull-through and blow-off. Cambridge relies on printed nail lines. IKO groups Dynasty with Nordic as a “Performance” laminate and calls Cambridge an “Architectural” laminate. The guide to 3-tab, architectural and designer shingles explains those shingle types.
The wind terms follow from that. In Canada, Dynasty carries a 210 km/h limit with the standard application. Cambridge carries 177 km/h with four nails, and 210 km/h only when the installer uses two extra nails (six in total), hand-seals the shingles and installs IKO starter at eaves and rakes.
Dynasty and Nordic are excused from hand sealing if the shingles have had a chance to seal down, and from rake starter.

IKO publishes no prices, but Calgary quotes show the spread. In 2024 to 2025 quotes, a single-layer tear-off and re-roof in Cambridge ran $450 to $590 per square all-in before GST, with most between $485 and $515.
Two 2025 Dynasty re-roofs worked out to about $480 to $500 per square. One 2025 Nordic Class 4 re-roof came to $12,800 for a house whose size was not printed, and one 2026 quote priced the Class 4 upgrade from Dynasty to Nordic at $4,375 extra.
Quotes priced per installed bundle (3 bundles to a square) ran $133 to $165 per bundle, with caps and starters billed per bundle and most other accessories included.
Your quote should show each line on its own row, together with the cap and starter products its warranty requires. You can find more figures in the breakdown of roof replacement prices in Calgary.
Dynasty gets to the higher wind limit with standard nailing, while Cambridge has to earn it with extra nails, hand sealing and starter at eaves and rakes. Nordic, next, keeps that advantage and changes the asphalt.
What makes Nordic different from Dynasty?
Of the three lines as IKO’s product specifications list them, only Nordic is rated Class 4 for impact under FM 4473 and UL 2218; an IKO bulletin last revised in September 2016 also names a separate Cambridge IR version as FM 4473 Class 4, as noted below.
IKO describes its fibreglass mat as carrying “an extra-thick coating of polymer-modified asphalt” with algae-resistant granules. IKO does not describe Dynasty or Cambridge as polymer-modified.
Nordic is also the only line here whose specifications list the Canadian standards, CSA A123.5 and CAN/ULC S107 Class A fire resistance, and a Canadian stock number series (4609). IKO recommends 10 in offsets between Nordic courses and open metal valleys.
The rating has limits that IKO states for every line. The impact class is “solely for the purpose of enabling residential property owners to obtain a reduction in their residential insurance premium, if available”, and the Limited Warranty does not cover hail damage. For a Class 4 roof, IKO recommends Class 4 hip and ridge caps with Class 4 field shingles.
IKO has also named two other laminates as made with SBS-modified bitumen and certified to FM 4473 Class 4: Cambridge IR and Crowne Slate, in a technical bulletin last revised in 2016. That bulletin does not mention Nordic, so check a quote that names Cambridge IR against what IKO currently makes.
The same bulletin tells buyers to read the bundle wrapper to confirm which standards a given shingle meets, and states that IKO shingles qualify for the Class A fire rating when installed with an underlayment felt.
IKO lines side by side
“Not stated” means IKO does not publish that value for the line. Where IKO’s Canadian warranty and its product specifications differ, the table shows both.
| Value | Cambridge | Dynasty | Nordic | Marathon Plus AR |
|---|---|---|---|---|
| Type | 2-layer laminate | 2-layer laminate | 2-piece laminate, polymer-modified asphalt | 3-tab |
| Size | 40-7/8 in x 13-3/4 in (1,038 x 349 mm) | 40-7/8 in x 13-3/4 in (1,038 x 349 mm) | 40-7/8 in x 13-3/4 in (1,038 x 349 mm) | 39-3/8 in x 13-1/4 in (1,000 x 336 mm) |
| Exposure | 5-7/8 in (149 mm) | 5-7/8 in (149 mm) | 5-7/8 in (149 mm) | 5-5/8 in (143 mm) |
| Coverage | 60 per square, 33-1/3 ft² (3.1 m²) per bundle | 60 per square, 33-1/3 ft² (3.1 m²) per bundle | 20 per bundle, 3 bundles per 100 ft² (9.29 m²) | 65 per square, 32-1/3 ft² (3.0 m²) per bundle |
| Nailing aid | printed nail lines | 1-1/4 in ArmourZone | 1-1/4 in ArmourZone | no nail line |
| Nail line above exposed edge | 6-3/8 in | 6-3/8 in | 6-3/8 in | 6-1/8 in, or 1/2 in above cut-out |
| Nails: standard / high wind | 4 / 6 | 4 / 6 | 4 / 6 | 4 / 6 |
| Wind limit, Canadian warranty | 177 km/h / 210 km/h | 210 km/h | 210 km/h | 112 km/h / 129 km/h |
| Wind in product specifications | 110 mph / 130 mph high-wind | 130 mph | not stated | 70 mph / 80 mph |
| Wind test classes | D3161 Class F, D7158 Class H | D3161 Class F, D7158 Class H | D3161 Class F, D7158 Class H | D3161 Class F, D7158 Class H |
| Impact (FM 4473 / UL 2218) | Class 3 (Cool Colors Plus) | Class 3 (Cool Colors Plus) | Class 4 | not stated |
| Algae coverage, Canada | 120 months | 120 months | 120 months | 60 months |
| Limited warranty | Limited Lifetime | Limited Lifetime | Limited Lifetime | 25 years (300 months) |
| Non-prorated, Canadian warranty | 180 months | 180 months | 180 months | 60 months |
| Non-prorated in product specifications | 10 years (U.S. only) | 15 years; also shown as 15 years (U.S. only) | not stated | 5 years |
| ROOFPRO extended non-prorated | 240 months | 240 months | 240 months | not offered |
IKO prints the Dynasty non-prorated period two ways: “15 Years” in one specification table and “15 Years (U.S. ONLY)” in another. For a Calgary roof the Canadian warranty governs, and it gives 180 months to all three laminates.
Colours IKO lists for each line
IKO publishes its colour names as pairings with matching cap shingles; where two names are joined with a slash, the field shingle and its cap use different names for the same blend.
IKO notes that colour availability varies by region and asks buyers to view several full-size shingles and an installed roof before choosing. A separate article covers how to choose a shingle colour.
- Dynasty (14 blends, capped with Hip & Ridge 12): Atlantic Blue, Biscayne, Brownstone, Cornerstone, Driftshake, Emerald Green, Frostone Grey/Dual Grey, Glacier, Granite Black/Dual Black, Monaco Red, Olde Style/Weatherwood, Sentinel Slate (select markets), Shadow Brown, Summit Grey/Charcoal Grey. IKO warns that blue granules may fade after extensive exposure to UV, which applies to Atlantic Blue. A Blackstone blend takes Granite Black/Dual Black caps, with Matte Black as an accent cap.
- Cambridge (10 blends, capped with Hip & Ridge 12): Beachwood (select markets), Summit Grey/Charcoal Grey, Dove White (select markets), Driftwood, Granite Black/Dual Black, Dual Brown, Frostone Grey/Dual Grey, Earthtone Cedar, Harvard Slate, Olde Style/Weatherwood.
- Nordic (6 blends, capped with Hip & Ridge Class 4): Driftshake, Glacier, Olde Style Weatherwood, Shadow Black/Granite Black, Shadow Brown, Summit Grey.
- Marathon Plus AR: only Dual Black is shown.
IKO sells the Cool Colors Plus palettes (seven Dynasty blends such as Harbor Black and Coastal Sands, nine Cambridge blends such as Amber Burst and Shoreline Grey) only in select U.S. markets.
Starter and ridge products that complete each line
IKO’s Canadian warranty requires matching hip and ridge caps: Marathon Plus AR, UltraHP, UltraHP IR, Hip & Ridge 12, Hip & Ridge Class 4, or an IKO-approved equivalent. Starter strips must be at eaves and rakes for the high-wind limit, except that Dynasty and Nordic need them only at the eaves.
| Product | Size | Exposure | Impact class | Per bundle | Used with |
|---|---|---|---|---|---|
| Hip & Ridge 12 | 36 in x 13-1/4 in (914 x 337 mm), splits into three 12 in pieces | 5-5/8 in (143 mm) | Class 3 | 21 shingles, 63 pieces, 29.53 linear ft (9 m) | Cambridge, Dynasty |
| Hip & Ridge Class 4 | 36 in x 13-1/4 in (914 x 337 mm), three 12 in pieces | 5-5/8 in (143 mm) | Class 4, polymer-modified | 21 shingles, 63 pieces, 29.53 linear ft (9 m) | Nordic |
| UltraHP / UltraHP IR | 11-1/2 in x 10 in (292 x 254 mm), preformed high profile | 8-1/4 in (210 mm) | Class 4 (IR only) | 30 pieces, 20 linear ft (6.1 m) | Dynasty, Nordic and other laminates |
| Leading Edge Plus starter | 40-7/8 in x 15-3/4 in, splits into two 7-7/8 in strips | not applicable | not stated | not stated | all IKO laminates |
| Armour Starter | 39-3/8 in x 13-1/4 in (1,000 x 337 mm) | 6 in (152 mm) | Class 4 | 21 shingles, 68.91 linear ft (21 m) | Armourshake only |
For Dynasty, the answer is Leading Edge Plus (or EdgeSeal) at the eaves and Hip & Ridge 12 or UltraHP on hips and ridges. Armour Starter, though made in Calgary, is designed for IKO’s Armourshake shingle and is not part of a Dynasty roof.
Hip & Ridge pieces are nailed 6-1/4 in (159 mm) above the butt and 1 in (25 mm) in from each edge, with nails at least 1-1/2 in (37 mm) long.
In cold weather IKO says to store cap shingles in a heated area so they bend more easily, and UltraHP over a ridge vent needs a vent width of 9 in or less.

IKO lists Leading Edge Plus at 32 starter strips and 109 linear ft (33 m) per bundle, fastened with four nails in standard application, granule side up with the sealant strip at the outer roof edge.
The installer removes about 20 in from the first strip at the eave so that starter joints do not line up with joints in the first course.
UltraHP and UltraHP IR are preformed, two-layer caps with a polymer-modified coating. IKO allows either on its laminates, but says only UltraHP IR should be used when a full roof system impact rating is wanted.
IKO also notes that UltraHP is stocked at select plants and warehouses in the western United States and UltraHP IR in the United States and Canada, each in select colours, so a quote that names plain UltraHP is worth confirming. The exposed nail heads of the last ridge cap are covered with roofing cement.
Warranty conditions that change the numbers
The headline values hold only when the roof is built to IKO’s conditions, and four of them matter in Calgary.
- Sealing before coverage. IKO’s wind warranty does not cover blow-offs before the sealant strip has thermally sealed, and shingles installed in fall or winter may not seal until the following spring.
- Hand sealing in Canada. IKO’s starter strip application rules state that in Canada, manual sealing along with additional nails is required for high-wind coverage. The Canadian warranty relaxes this for Nordic and Dynasty when the shingles have had the opportunity to seal down.
- Low slopes. IKO never allows shingles below 2:12. From 2:12 to under 4:12, underlayment courses must overlap by 19 in, or a full layer of ice and water protector goes over the deck. Shingles on 3:12 to 4:12 keep the full warranty term; below 3:12 down to 2:12 they are warranted for 12 years.
- ROOFPRO extension. The 240-month non-prorated period requires an IKO ROOFPRO member contractor in one of the two qualifying tiers IKO names, at least three IKO PROFORMAX accessories, a tear-off to a clean deck, a single-family home of 10 to 100 squares and a pitch of 4:12 or steeper. Installing over an existing layer voids the extension.
Owners other than an individual on a single-family home, such as a condominium corporation, get a 40-year warranty period instead of Limited Lifetime.
IKO’s Canadian comparison of its standard warranty with its two Iron Clad extensions, shown below for the three laminates, adds transfer, fee and tear-off terms. Only ROOFPRO Select and Craftsman Premier contractors can offer the extensions.
| Term | Standard warranty | ROOFPRO extension | CodePlus extension |
|---|---|---|---|
| Lines | Cambridge, Dynasty, Nordic | Cambridge, Dynasty, Nordic | Dynasty and Nordic only |
| Nailing | Four nails | Four nails | Six nails, with enhanced installation requirements |
| Iron Clad Protection Period | 15 years | 20 years | 25 years |
| Wind limit | Cambridge 177 km/h, or 210 km/h with high-wind application; Dynasty and Nordic 210 km/h | Cambridge 177 km/h four-nailed, 210 km/h six-nailed; Dynasty and Nordic 210 km/h four-nailed | 210 km/h six-nailed |
| Algae warranty | 10 years | 10 years | 10 years |
| Transfer | Once, in the first 10 years only; coverage ends 10 years after installation | Once, in the first 15 years | Once, in the first 15 years |
| Application fee | $0 | $75 | $75 |
| Reasonable tear-off and disposal during the period | Not included | Yes, limited after a transfer | Yes, limited after a transfer |
After a transfer under either extension, the Iron Clad period runs only to year 15 and no longer includes tear-off and disposal. If the transfer comes after year 12, the Iron Clad period ends and coverage is prorated until year 15.
The qualifying PROFORMAX accessories are an IKO ice and water protector at eaves and valleys, an approved IKO synthetic underlayment under all shingles, an IKO hip and ridge cap, which is always required, and Leading Edge Plus or EdgeSeal starter.
CodePlus is open to pitches between 3:12 and 4:12 when its enhanced installation requirements are met. For either extension, the contractor must apply online with proof of purchase within 90 days of completing the roof, and the extension takes effect only when the homeowner receives IKO’s written approval.
IKO states that it does not warrant the contractor’s workmanship and that the extensions give no coverage for improper installation. Fratello Roofing & Exteriors Ltd installs IKO shingles and covers that gap itself: every job carries its 10-year workmanship warranty on top of the manufacturer’s warranty, so both the product and the install are covered.
A roof laid in fall or winter may not seal until spring, and until it seals a blow-off is not covered; in a cold city that is the condition to plan around. Calgary’s chinooks put it to the test.
What this means for a Calgary roof
Calgary’s chinook gusts make the wind terms the first difference to weigh: Dynasty and Nordic reach 210 km/h without the six-nail and hand-seal conditions Cambridge needs. With a hail season running June to August, Nordic with Hip & Ridge Class 4 caps is the IKO combination that carries a Class 4 rating, though IKO excludes hail damage from the warranty.
The Class 4 impact-resistant roofing page describes the Malarkey and Euroshield alternatives. IKO makes all three laminates at its Calgary plant. Fratello Roofing & Exteriors Ltd can inspect your roof and quote a new roof in Cambridge, Dynasty or Nordic side by side; call (403) 404-9833.
Questions people ask
What is the difference between IKO Cambridge and Dynasty?
They are the same size and exposure. Dynasty adds the 1-1/4 in ArmourZone woven nailing band and reaches IKO’s 210 km/h wind limit with standard nailing, while Cambridge needs six nails and hand sealing for 210 km/h and otherwise carries 177 km/h.
Is IKO Nordic a Class 4 shingle?
Yes. IKO rates Nordic Class 4 under FM 4473 and UL 2218 and pairs it with Hip & Ridge Class 4 or UltraHP IR caps. The rating is for insurance premium purposes, and the warranty excludes hail damage.
What colours does IKO Dynasty come in?
IKO pairs 14 Dynasty blends with Hip & Ridge 12 caps, from Atlantic Blue and Biscayne to Shadow Brown and Summit Grey, plus a Blackstone blend. IKO sells the seven Cool Colors Plus blends, such as Harbor Black and Coastal Sands, only in select U.S. markets.
Are IKO shingles made in Calgary?
Yes. IKO lists Calgary, Alberta as a manufacturing plant for Cambridge, Dynasty, Nordic, Marathon Plus AR, both Hip & Ridge cap products, Leading Edge Plus and Armour Starter.
What wind rating do IKO shingles have?
All three laminates are tested to ASTM D3161 Class F and ASTM D7158 Class H. IKO’s Canadian wind warranty runs 15 years, at 210 km/h for Dynasty and Nordic and 177 km/h (210 km/h with high-wind application) for Cambridge.
Which IKO starter and ridge products go with Dynasty?
Leading Edge Plus or EdgeSeal starter at the eaves, and Hip & Ridge 12 or UltraHP caps on hips and ridges. Armour Starter is for Armourshake, not Dynasty.
